How GPS Finds Your Location and Why It Drifts Near Buildings
Follow the timing measurements that locate your phone, and learn how reflected signals and poor satellite geometry move the map dot.
Prepared with AI assistance using the primary sources linked below. How Astroboat works
Location starts with a clock
GPS satellites broadcast radio signals containing timing and orbit information. The receiver uses how long those signals appear to have traveled to estimate its distance from each satellite. Because radio moves at light speed, a timing error of one microsecond corresponds to about 300 meters of apparent range error. A phone's clock is not nearly as precise as the clocks on the satellites.
Reference: NIST: How GPS measures location; FAA: How GPS works
Why a basic fix needs four satellites
A receiver needs to estimate three position coordinates and its own clock offset. Measurements from at least four satellites give it enough information to solve for those four unknowns in a basic fix. The distance estimates before correcting for that clock offset are called pseudoranges. The phone listens to the satellites; it does not have to send a satellite its location.
Reference: NIST: How GPS measures location; FAA: How GPS works
Why the dot can jump across a street
Tall buildings can block direct signals. A signal that bounces off a facade travels farther than the direct route, so the measured range can be too long. This is called multipath. Satellites visible only through a narrow gap can also give poor geometry. Spread across the sky, they constrain the possible position better than several in nearly the same direction.
Reference: GPS.gov: Factors that affect accuracy
Tell a location problem from a map problem
Compare the dot at a street corner between tall buildings and again under a wider patch of open sky. Give the receiver time to settle. A shrinking uncertainty circle and steadier dot suggest better reception. If the dot stays fixed but the app places the street or address incorrectly, check the map data instead. A map and a position fix are different inputs.
Reference: GPS.gov: Factors that affect accuracy